For aquariums >20,000 liters (5,250 USgal.).
Flow rate: 45,000 to approx. 80,000 l/h
(11,900 to approx. 21,000 USgal./h)
Flow velocity: 1.1 – 2.0 m/s (43.3″ – 78.7″/sec.)
Energy consumption: 290-420 W
Power supply unit: 100-240V / 50-60Hz / 12V DC
Cable length: 10 m (393.6″)
Dimensions (L x W x H): 340 x 165 x 227 mm (13.4″ x 6.5″ x 8.9″)
Output: ø125 mm (4.9″)
Attachment to pipe, ø32 mm (1.3″)
Supplied with Wavecontroller 7092
DKK 26.630,28
Product not in stock - Estimated backorder time: 14 days
EAN
Product not in stock - Estimated backorder time: 14 days
TUNZE® Turbelle® masterstream … it streams in the shadows
The Turbelle® masterstream pumps are intended for the high-performance propeller pump market segment, and primarily predetermined for an implementation in experience zoos, research institutes, rehabilitation clinics and fish or algae farms. We also offer a version for aquarists who operate large aquariums and require a strong as well as wide flow rate for their reef tanks. Turbelle® masterstream pumps are designed to provide a maximum degree of efficiency, combined with a low energy consumption. Thanks to the extra-low safety voltage of the electronic TUNZE® PM motor, the pumps will operate at a pleasant noise level even at peak performance, while consuming significantly less power for the same output compared to conventional water pumps. Turbelle® masterstream
Controllable performance
The Turbelle® masterstream pumps are electronically speed-controlled by Turbelle® Controller / Multicontroller / SmartController 7000. They can be used ideally for water circulation, wave action or wave-and-tide simulations.
A 12 V version for swimming pools
Model 6560 in 12 V technology and a flow rate of 60,000 l/h (15,850 USgal./h) has been designed especially for swimming pools or large aquariums.
100% corrosion-resistant
All parts of the pumps are made of ASA, POM and adjuvant enriched PA6.6. PU coated cable; the motor axle is made of titanium alloy; the motor and the electronics are cast in polyurethane (PU) resin.
No external control
The pump control is integrated completely in the motor block ensuring a low-maintenance operation with high efficiency and ideal water cooling. All Turbelle® masterstream pumps only require one external power supply unit or safety connector with a corresponding direct-current source (battery, solar cell, et cetera).
No problem in case of power failure
Fitted with Safety Connector 6515.500, Turbelle® masterstream can be operated on every 11 V to 24 V direct-current source (battery, solar cell). The safety connector permits normal operation with the TUNZE® power supply unit, but in case of a power failure it will automatically switch over to a battery or a direct-current source. Turbelle® masterstream
Eco-energetic
A small sample calculation using Turbelle® masterstream 6580 (80 m³/h (21 USgal./h) – 420 W) reveals that energy efficient water movement results in enormous cost effectiveness:
Tank volume: 60 m³ (15.9 USgal.), flow selection by centrifugal pump (32 m³/h (8.5 USgal./h) – 2,200 W). At an annual operating time of 8,760 hours and a kilowatt price of 13 pence / US$ 0.30 this results in a cost saving of about 2,027 £ / US$ 4,655 per annum.
