Hanna checker for Phosphate ULR HI774

In stock


Tips for an accurate measurement

It is important that the sample does not contain any debris. Whenever the cuvette is placed into the measurement cell, it must be dry outside, and completely free of fingerprints, oil and dirt. Wipe it thoroughly with HI-731318 or a lint–free cloth prior to insertion. Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove bubbles by swirling or be gently tapping the cuvette. Do not let the reacted sample stand for too long after reagent is added as accuracy will be affected. After the reading, it is important to immediately discard the sample otherwise the glass might become permanently stained.




  • Easier to use and more accurate than chemical test kits

  • Dedicated to a single parameter

  • Small size, big convenience

  • Ideal for: Aquariums, Environmental, Aquaculture, Water Quality

Range 0 to 999 ppb
Resolution 1 ppb
Accuracy ±15 ±5% of reading @ 25ºC
Light Source LED @ 525 nm
Light Detector Silicon photocell
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type (1) 1.5V AAA
Auto-off After 3 minutes of non-use and 2 mins after reading
Dimensions 86 x 61 x 37.5 mm
Weight 64 g
Method Adaptation of Standard Ascorbic Acid Method. The reaction between the phosphate and the reagent causes a blue tint in the sample.